ARCELI CC2531 Evaluation Module USB Dongle, CC2531EMK Compatible, Zigbee USB Dongle, EZSync104
Thumbnail 1Thumbnail 2Thumbnail 3Thumbnail 4Thumbnail 5

ARCELI CC2531 Evaluation Module USB Dongle, CC2531EMK Compatible, Zigbee USB Dongle, EZSync104

3.4/5
Product ID: 142781522
Secure Transaction
Frequently Bought Together

Description

  • About this item
  • 1.Size: 4.1*1.6cm 2.Board Thickness:1.6mm 3.Operating Frequency:2.405-2.485GHz 4.Wireless Transmission Speed Rate:250Kbaud 5.Power Consumption:<20mA (receiving);<25mA (transmission)

Type:Logic ICsCondition:NewSupply Voltage:otherDissipation Power:otherOperating Temperature:otherFeatures:The whole network minimum size: 4.1 * 1.6 cm, ultra一narrow design, to avoid conflict with other USB devices;1. product solid small size, thickness of 1.6MM, leads to 8 IO port, DEBUG pin. Can increase the shell;2.the operating frequency of 2.405一2.485GHz, wireless transmission rate of 250Kbaud;3, power consumption: receiving current &lt;20mA, emission current &lt;25mA;4, with the firmware to achieve protocol analyzer function;5, the choice of BALUN design (2450BM15A0002E), the distribution of small impact, superior performance, stable and reliable;6, the DONGLE can burn their own procedures to send and receive modulesPackage Included:1 x Wireless Zigbee CC2531 Sniffer

Reviews

3.4

All from verified purchases

C**O

Works as expected

This worked great, I was able to flash with new code.

A**S

Does the job

Just started messing about with building Home Assistant on a Raspberry Pi and wanted to make everything local. This was recommended so I went ahead and got it.To make it useful, you need to flash the firmware but if you search on YouTube there's a guy who goes through it so that you can do it easily using the Pi. I say "easily" but it's still a bit of a faff as you need to solder 4 wires onto a tiny connector to attach it to the GPIO pins on your Pi. Then there's a bit of messing about to actually get it to flash. I'd say if I can do it then most people should be able to.The antenna is built into the end of the board and it's not great. Moving it up from the floor to about 1m took the signal from about 1 to about 25. I've also got the bits to add an external antenna. You should think about this, or putting it on the end of a USB extension cable so that you can position it where you'll get the best reception.All in all though it does exactly what I need so I would recommend it

R**R

ZigBee controller without proprietary hubs

Works great with IKEA tradfri and Xiaomi sensors when paired up with zigbee2mqtt and home assistant. Did get interference from WiFi router so ensure you move away from those

C**S

Bon produit

Fonctionne bien avec Zigbee2MQTT 1.8 et Home Assistant

C**N

Qualité signal médiocre

Article retourné car très mauvaise qualité du signal de réception.Sur les deux, un seul arrivait à accrocher le signal et cela de manière médiocre.(Mauvaise soudure ou qualité PCB à revoir)

M**I

Pessimo

Pessimo

Common Questions

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Vikram D.

The MOLLE sheath is of exceptional quality. Very happy with my purchase.

2 weeks ago

Suresh K.

Very impressed with the quality and fast delivery. Will shop here again.

4 days ago

Shop Global, Save with Desertcart
Value for Money
Competitive prices on a vast range of products
Shop Globally
Serving millions of shoppers across more than 100 countries
Enhanced Protection
Trusted payment options loved by worldwide shoppers
Customer Assurance
Trusted payment options loved by worldwide shoppers.
Desertcart App
Shop on the go, anytime, anywhere.

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Vikram D.

The MOLLE sheath is of exceptional quality. Very happy with my purchase.

2 weeks ago

Fatima A.

Best international shipping I've ever tried. Worth every penny!

3 days ago

Arceli Cc2531 Evaluation Module Usb Dongle Cc2531emk Compatible Zigbee Usb | Desertcart France